What started out as a tin for my tea has been transformed into this beautiful decorative gift container.
It’s easy to make your own decorative gift container. All that is necessary is a container, some decorative paper, double sided tape and a craft knife or scissors. Just follow the do-it-yourself instructions below.
From left to right: original tea tin. tea tin with paper torn off with sticky residue remaining, tea tin cleaned, De-Solv-it which takes off the sticky residue.
I love to use cylindrical containers like the ones that tea or hot chocolate or oatmeal comes in. My favorite is the metal tins in the photo on the left that contains Double Green Matcha Tea from The Republic of Tea.
First I empty the contents from my container and clean it as best I can. For my example I have used my tea tin. I first remove the paper label. There is usually an awful sticky residue and some paper left behind. To clean this I use De-Solv-it which is organic, biodegradable, environmentally friendly and works like a champ to remove all sorts of sticky stuff.
Paste paper is cut to the height of the can and enough to overlap about an inch going around the can.
Once my tin is ready, I measure the height of the tin. I cut a piece of decorative paper the height of the tin and about an inch longer than its circumference. I have found that using a fairly light weight paper works best. In this example I am using a piece of paste paper that I made. For information on how I make my paste papers, see my posts Making Paste Paper: Part 1 and Making Paste Paper: Part 2.
Here I am trimming the double sided tape to the height of the paper.
Now I attach a strip of double sided tape to each of the ends of the paper. Be sure to apply the tape to the wrong side of the paper. I put the tape as close to the end of the paper as possible and overlap the tape on top and bottom on to a cutting surface. Then I cut the tape as close to the height of the paper as possible without cutting the paper. See the photo on the left. The double sided tape is just one I picked up at a local stationary store. You don’t need a special type of artists tape.
The photo above shows one side of my paste paper has been attached to the can.
Now I attach one side of the paper to the tin. I carefully line up the paper on the can and press to attach the paper to the tin. I roll the tin slowly while making sure the paper fits properly. If I am off, I unroll the tin and carefully reposition the paper and start rolling again. When I come to the end of the paper it should overlap a little and I push to attach the end of the paper. Now all I need to do is to add a gift.
My finished gift container. Note that the seam is facing you in this photo. It’s hardly noticeable at all.
See, it’s easy. I love finding ways to re-use things that would normally end up in either the trash or recycle bin. Once I give a gift in this container, I am sure my container will get used over and over again.